Recent Comments

Use an LED Light to Make a Firefly Lantern

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

firefly-feature

Want a natural nightlight? Try making a firefly lantern.

firefly-1

Step 1: Make a mesh container from a piece of fiberglass window screen. Roll it into a tube with overlapping ends. Staple the tube together leaving a two-inch opening to slip fireflies through. Cap off each end with a plastic lid and duct tape.

firefly-2

Step 2: To use a female decoy firefly to catch males, connect the leads from a green LED light to two six-foot lengths of insulated copper wire. Attach one of the wires to a 9-volt battery. To make your “female firefly” flash, touch the second wire to the battery. Keep the light six feet away from you. (Fireflies avoid humans.)

firefly-3

Step 3: To crack the fireflies’ code, watch a female in the grass answer a flying male’s signal. Note how long she waits before flashing a response. With your LED light inside an open container, mimic the female’s pattern.

firefly-4

Step 4: Put any males that arrive into your lantern. At least 40 fireflies per lantern should give you plenty of light. Release them, unharmed, the next day.


Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

Leave a Comment

Please don't use your real name.