Recent Comments

How to Make an Origami X-Wing Fighter

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

Fold your very own Star Wars X-Wing ship! Follow the instructions in the video above, or use the following step-by-step instructions to make an origami X-Wing fighter.

WHAT YOU’LL NEED

One square sheet of origami paper (the larger the sheet, the easier it will be to fold)

WHAT YOU’LL DO

Step 1: Start with the color side up. Fold diagonally both ways. Unfold.


Step 2: Flip paper over. Fold in half side to side. Unfold.


Step 3: Fold in half, top to bottom.


Step 4: Squash fold both sides. (Hold top corners, and pull down and inward.)


Step 5: Pull up center crease.


Step 6: Your paper should now look like this.


Step 7: Fold and unfold right panel.


Step 8: Squash and flatten.


Step 9: Fold right panel to the left.


Step 10: Slightly open flap to the right and squash and flatten.


Step 11: Flip over.


Step 12: Repeat steps 7-10 on back two panels.


Step 13: Fold toward center. Unfold.


Step 14: Pull up on center and fold up as sides come in. Flatten.


Step 15: Repeat steps 13-14 on all four sides.


Step 16: On two opposing sides, fold down point as shown.


Step 17: On a side with point up, inside reverse fold the legs out to make two wings. Repeat on opposite side to make two more wings.


Step 18: Fold the right edge to the center. As you are folding the right edge, the bottom edges should fold together.


Step 19: You fold should look like this once flattened. Repeat step 18 on all sides.


Step 20: Once all sides are complete, take the right side and fold over to the left. Repeat on back.


Step 21: The bottom triangle flap should no longer have a split in the middle.


Step 22: Fold the bottom triangle flap up toward the middle. Repeat on back.


Step 23: Inside reverse fold the tips up. Repeat on the other side. You’ll have a total of four to complete.


Step 24: Fold the right panel over to the left. Repeat on other side.


Step 25: Your Star Wars X-Wing is complete!



Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

19 Comments on How to Make an Origami X-Wing Fighter

  1. go slower plz

  2. The steps are too fast and your hands are in the way. You really expect people to do this?

  3. cant go past 17 go a bit slower!

  4. to fast

  5. Couldn’t figure out step 17, video is too quick for the picture quality.

  6. i maaddeee iiiitttttttttttt!!!!!!!!!!!!!!!!!!!!!!!!!!

  7. It was fun but it could be a bit slower.

  8. Proud_Badger // March 6, 2018 at 4:29 pm // Reply

    It goes by too fast. I’m stuck on step 18. It moves so fast that I can’t tell what’s being folded when. I really wanna finish this but I can’t.

  9. Looperpooper // January 22, 2018 at 12:12 pm // Reply

    I agree with anonyomous it’s too fast

  10. The videos are way too fast to understand. They need to be slowed down.

  11. s u p e r h a r d

  12. WAY TOO FAST

  13. wow it is relly hard

  14. I agree with the others, the “step by step” is almost completely unusable because it’s so freaking fast. This was a very frustrating project for my son and I to do give how many times we have to rewind and rewatch each step over and over again. Slow it down to 1/4 of the original speed and it might be usable.

  15. It’s total fast i’m stuck on number 18.

  16. If you are going to make a video or even a step by step with pictures you have to slow it down because I am a Boy Scout and I am still having trouble making it and I really was looking forward to making it. Imagine a Cub Scout trying to make it they will be a lot more confused looking at a paper or a fast screen where they can’t tell what to do.

  17. NicknamePerson // December 1, 2017 at 9:01 pm // Reply

    I could not go past the 7th step.

  18. marshmallow man // November 29, 2017 at 4:19 pm // Reply

    You could play the video a bit slower, otherwise it was fun!!!!

Leave a Reply to Matt Cancel reply

Please do not use your real name.