Recent Comments

How to Make a Tetrahedral Kite

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

kite-8

Alexander Graham Bell became famous for inventing the telephone. But he had a bigger dream: manned flight.

A year before the Wright brothers made their historic flight in Kitty Hawk, N.C., Bell wrote in 1902 that it was possible to build large, lightweight flying machines. Instead of building one large wing, he proposed a bunch of small wings in the form of tetrahedrons (teh-tra-HEE-drons), strong, pyramid-shaped structures.

Was Mr. Bell right? Build this 10-cell tetrahedral kite and soar!

WHAT YOU’LL NEED

  • Scissors
  • Ballpoint pen
  • 60 long, straight drinking straws
  • Kite string
  • Needle (big eye)
  • File folder or poster board
  • Plastic bags
  • Cellophane tape
  • Dowel, 1/8 inch diameter

WHAT YOU’LL DO

Step 1: Cut a piece of string eight times as long as the length of a straw. Thread the needle with the string.

kite-1

Step 2: String three straws together. Tie into a triangle using a square knot. Leave a 2-inch end.

kite-2

Step 3: String two more straws on the long string. Tie to one of the triangle’s corners using a double half hitch. Cut the string leaving a 2-inch end. Keep remaining string for later.

kite-3

Step 4: Make a pattern by tracing both triangles onto the file folder or poster board. Draw a 1-inch flap along the side of each straw. Cut out. Save for step 6. Tie remaining string to left or right corner in figure above.

kite-4

Step 5: Thread a sixth straw with leftover string. Tie the string to the opposite corner, creating a three-dimensional figure. You now have the frame of one cell.

kite-5

Step 6: Trace the pattern onto the plastic bag, and cut along the lines.

Step 7: Lay the frame on the plastic, and tape in place.

kite-6

Step 8: Make nine more cells.

Step 9: Tie cells together with the ends of the strings. Be sure the leading edges face the same way!

kite-7

Step 10: Slide the dowel through the straws in the leading edge and cut excess. Put tape over each end of the dowel to keep it from sliding out.

HOW TO GET YOUR KITE READY TO FLY

1. Tape the dowel in place at the areas marked by arrows above.

2. Cut string 1 1/2 times as long as the leading edge.

3. Thread string on a needle. Sew ends of string through plastic around the dowel.

4. Tie an overhand knot one-third down from the top.

5. Tie your flying string to the knot, and launch your kite.


Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

13 Comments on How to Make a Tetrahedral Kite

  1. i’m so confused

  2. im making one for tech i hope it flies!

  3. Totally easy and fun. 🙂 Love it.

  4. Mickey Mouse // March 4, 2010 at 7:28 pm // Reply

    Yes! I’m done with my project! This kite website really helped! Thanks whoever made this site! ha

  5. Mickey Mouse // February 28, 2010 at 7:35 pm // Reply

    Cool! I’m using this for a project and its helped me a lot! ha

  6. im making one 4 a geometery project…..hope it works

  7. how mutch dose it cost

  8. djembe drummer09 // June 7, 2009 at 5:53 pm // Reply

    We made those in science this year. Some kids thought it was hard but it is really easy.

  9. These fly great! Made mine out of newspaper, with 4 units. Flies MUCH BETTER with a REALLY LONG TAIL.

  10. i am doing this as i speak for geometry. its not hard, but its a long process. the hardest part was stringing the kite

Leave a Reply

Please do not use your real name.