Recent Comments

Build a Chuck Box for Camp Cooking

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

Make camp cooking easier and more convenient with this portable kitchen box.

chuckbox-550

WHAT YOU’LL NEED:

  • Your cooking gear
  • Tape measure
  • 9/16″ plywood (You’ll need one standard sheet for the small-size box shown.)
  • Four 1″ x 3″ oak planks for the legs (The average height for the swing-down work surface should be 30″ to 34″.)
  • Scrap wood for drawer rails
  • Eight carriage bolts and wing nuts
  • Carpenter’s glue
  • Sandpaper
  • Drill and bits
  • Screwdriver
  • Fine-toothed saw
  • Chain and six eye screws
  • Paint
  • Exterior wood screws
  • Trunk handles
  • Two eye screws and swing hooks
  • Piano hinge
  • Sturdy plastic wash tubs for drawers

WHAT YOU’LL DO

Step 1: Gather all the cooking and cleaning gear you want to store in your chuck box. The amount of gear you have will determine the size of your chuck box and how the inside is designed. The box shown here is just one example of how your box could look. Some boxes have only one or two drawers to make room for larger items such as pots and pans. It’s up to you.

Once you have decided on the size and shape of your box, cut out all the plywood pieces. Sand, prime and paint all plywood surfaces and edges before assembling. This is much easier than painting the box afterward. Add slide rails for drawers if needed.

Step 2: Screw and glue the box together. Remember to predrill all screw holes and countersink the heads for a neat finish. After your box is assembled, lightly sand it and brush on a second coat of paint.

Step 3: Lay the painted door in position and carefully screw on the piano hinge.

chuckbox-2

Step 4: Attach the chain.

Step 5: Close the door and determine the position of the eye screws and swing hooks before screwing them in place.

Step 5: Attach the trunk handles. (Use nuts and bolts for this so the handles are extra strong. Some larger boxes many need two handles per side.)

Step 6: Fill your chuck box with your cooking gear and you’re ready for your next campout.

YOU CAN ADD SOME LEGS

Adding legs can get your chuck box off the ground and easily accessible. If you don’t have a tailgate or picnic table to set your chuck box on, this is definitely the way to go. The legs store flat and can be attached with no tools needed using wing nuts and carriage bolts.

The legs can be made from 2″ x 4″ fir or 1″ x 3″ oak. The oak is more expensive but will be stronger and last longer. Make sure the legs are angled outward enough so the box is sturdy when the front is open and in use.


PHOTOS OF COMPLETED PROJECT

Check out these photos of chuck boxes sent to us by Boys’ Life readers. If you have a photos of a BL Workshop project, please use the form below to send them to us.


Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

15 Comments on Build a Chuck Box for Camp Cooking

  1. Who’s the one that named this thing a “Chuck Box”? I only ask because my scout leader was named Chuck. Weird Huh? I always assumed that It was the “Chuck Box” because He built the supply container. The things that you find out.

    • From the “Chuckwagons” in the old wagon train or cattle drive days I assume, where the cook had all his cooking supplies and opened up in each new camp site for the night.

  2. Make sure the stuff you want to put in your box will fit! (before you start cutting the wood) It is more important that a full roll of paper towels will fit inside than making sure it can be made out of exactly one sheet of plywood!

    But be careful about making it too big too! Bigger is definitely not better if it won’t fit in any of your vehicles!

  3. scouter602 // May 5, 2015 at 9:35 pm // Reply

    Teach a woodworking merit badge where the boys make the box. Teach the class by patrol, and let them decorate as they see fit too.

  4. Using 4 metal Conduit anchors set at angles on both sides with a wood strip as a stop, the leg poles can slip into place without the nuts and bolts (that magically disappear). By bolting 4 conduit anchors on the top, the legs become handles and the “Chuck” can be carried like a stretcher by up to 4 boys.

  5. My troop even put plastic granite sheeting on the fold out surface, and we made the legs so that we could make them stick out sideways out of the box so we could move it easier.

  6. Mom of 2 Scouts // June 10, 2014 at 5:07 pm // Reply

    I just saw this and asked my Boy Scout if he knew what it was. He told me he did, and proceeded to tell me what it is used for. He leaves this Sunday for Summer camp, so his Troop won’t need them.

  7. Great stuff

  8. With a little planning you could offset the holes for the legs and drill two extra holes, then connect the legs so they stick out parallel to the bottom of the box. This would allow the box to be carried by two or more boys “sedan chair” style, which might be easier for smaller boys.

  9. we put a pipe with groves it and srewed it in so that way it is more stable

  10. I think it could be used for something else important

Leave a Reply to robira13 Cancel reply

Please do not use your real name.