Recent Comments

How to Make a Duct-Tape Wallet

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

Duct tape comes in 2-inch-wide rolls and is available in many colors. Here’s how to use some to make this handy duct-tape wallet that will last for years.

WHAT YOU’LL NEED TO MAKE A DUCT-TAPE WALLET

  • Duct tape
  • Ruler
  • Scissors or utility knife

WHAT YOU’LL DO TO MAKE A DUCT-TAPE WALLET

Step 1: Cut four strips of duct tape, each 9″ long. With the adhesive side up, stick the duct-tape strips to one another in a row, with a 14” overlap.

Step 2: Make a second sheet. Carefully stick the adhesive sides of the two duct-tape sheets together, lining up the edges.

Step 3: Cut another 9″ strip of duct tape. Use a utility knife or scissors to make a small cut in the center of one end of the duct tape. Tear the strip into two straight 1″ strips.

Step 4: Fold and adhere the 1″ duct-tape strips to the 9″ ends of the sheet. This will make a smooth, clean finished edge.

Step 5: Using the scissors or utility knife, trim the sides of the sheet, making it 8 1/2″ wide.

Step 6: Fold the sheet in half.

Step 7: Tear two 1″ x 4″ duct-tape strips and attach one to each end. Fold them over the sides of the wallet, and trim the excess.

Step 8: To make a smaller pocket for cards, cut two strips of tape each 5″ long and stick the two pieces (adhesive sides) together.

Step 9: Fold and adhere a 1″ strip onto the 5″ edge. Trim the pocket to 4″ long.

Step 10: Using 1⁄2″ strips of duct tape, stick the pocket in place as shown above. Trim the strips flush.

Your duct-tape wallet is complete!


PHOTOS OF COMPLETED PROJECT

Check out these photos of the completed project sent to us by Boys’ Life readers. If you have a photos of a BL Workshop project, please use the form below to send them to us.


Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

5 Comments on How to Make a Duct-Tape Wallet

  1. pleasebecareful // September 7, 2018 at 9:05 am // Reply

    this does not work if the tape is not sticky watch out for any nonstick tape

  2. Shelshel345 // June 4, 2018 at 4:41 pm // Reply

    Can you please make a video to do it I tried and it is to confusing 🤔

  3. Cool.

  4. Amir's mom // March 23, 2018 at 4:12 pm // Reply

    Is there anything we can do to make sure the wallet stays closed while lying flat?

  5. That was radical!

Leave a Reply to Amir's mom Cancel reply

Please do not use your real name.