Power a digital clock by making a battery out of lemons.
WHAT YOU’LL NEED
WHAT YOU’LL DO
1. Roll the lemons on a hard surface, being careful not to break the skin. (This will loosen the pulp, make the lemons juicy and help the electrons move through the lemons.)
2. Wrap one end of a wire around a penny and the other around the end of a nail. (These will be used to connect the lemons together. Connecting lemons with metal wires adds voltage from each lemon. The more lemons you connect together, the higher the voltage.)
3. Connect a second wire to a penny and leave the other end bare.
4. Wrap the third wire around a nail and leave the other end bare.
5. Cut a slit in each lemon just large enough to insert the pennies. Insert the pennies and nails as shown in the image at the top of this page. (Make sure the copper wire has good contact with both the pennies and nails, and make sure the pennies and the nails make good contact with the lemon pulp and juice.)
6. Remove the battery from the clock and touch the wires to the positive and negative terminals in the clock. If your clock doesn’t work, try switching the wires.
7. You can also use clip leads (alligator clips) to connect your wires to the pennies, nails and clock, as shown below.